|
The Harwell CADET was the first fully transistorized computer in Europe, and may have been the first fully transistorized computer in the world. The electronics division of the Atomic Energy Research Establishment at Harwell, UK built the Harwell Dekatron Computer in 1951, which was an automatic calculator where the decimal arithmetic and memory were electronic, although other functions were performed by relays. By 1953, it was evident that this did not meet AERE's computing needs, and AERE director Sir John Cockcroft encouraged them to design and build a computer using transistors throughout. E. H. Cooke-Yarborough based the design around a 64-kilobyte magnetic drum memory store with multiple moving heads that had been designed at the National Physical Laboratory, UK. By 1953 his team had transistor circuits operating to read and write on a smaller magnetic drum from the Royal Radar Establishment. The machine used a low clock speed of only 58 kHz to avoid having to use any valves to generate the clock waveforms. This slow speed was partially offset by the ability to add together eight numbers concurrently. The resulting machine was called CADET (Transistor Electronic Digital Automatic Computer – backwards). It first ran a simple test program in February 1955. CADET used 324 point-contact transistors provided by the UK company Standard Telephones and Cables, which were the only ones available in sufficient quantity when the project started; 76 junction transistors were used for the first stage amplifiers for data read from the drum, since point-contact transistors were too noisy. CADET was built from a few standardised designs of circuit boards which never got mounted into the planned desktop unit, so it was left in its breadboard form. From August 1956 CADET was offering a regular computing service, during which it often executed continuous computing runs of 80 hours or more.〔 〕 Cooke-Yarborough described CADET as being "probably the second fully transistorised computer in the world to put to use", second to an unnamed IBM machine.〔 Both the Manchester University Transistor Computer and the Bell Laboratories TRADIC were demonstrated incorporating transistors before CADET was operational, although both required some thermionic valves to supply their faster clock power, so they were not ''fully'' transistorised. In April 1955 IBM announced the IBM 608 transistor calculator, which they claim was "the first all solid-state computing machine commercially marketed"〔(IBM Archives, 1955 )〕 and "the first completely transistorized computer available for commercial installation",〔(IBM Archives: IBM 608 calculator )〕 and which may have been demonstrated in October 1954, before the CADET. By 1956, Brian Flowers, head of the theoretical physics division at AERE, was convinced that the CADET provided insufficient computing power for the needs of his numerical analysts and ordered a Ferranti Mercury computer. In 1958, Mercury number 4 became operational at AERE to accompany the CADET for another two years before the CADET was retired after four years' operation. ==See also== *History of computing hardware, Second generation: transistors 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Harwell CADET」の詳細全文を読む スポンサード リンク
|